Adhesive Hoof-Tite II 220ml Hot. Hoof-Tite is a 2-component adhesive. Dries in about 30 seconds. After curing, the adhesive does not become brittle, but adheres strongly to the hoof and block. High quality 220ml cartridge that can be opened and closed without tools. The green protective cap is put back in place to keep the glue airtight until the next use. Strong adhesion to wooden and rubber blocks. The mixing cannula ensures good mixing of the components.
Use of Hoof-Tite II: For optimum gluing results, the best working temperature is between 15 and 26 degrees Celsius. Remove the protective cap from the cartridge, open the locking screw and insert the mixing nozzle. Attach the cartridge to the cartridge clamp. Turn the clamp vertically upwards and press the components into the mixing cannula. This will remove excess air bubbles from the cartridge. After use, remove the mixing cannula. To use the cartridge again, replace the mixing cannula. Does not include cartridge press or mixing cannula.
Available separately:
Mixing cannula for glue (16273)
Dispensing gun for glue (16299)
