Phytosanitary Glove Vinex
Keron Phytosanitary Glove Vinex. The length of the chemical protective glove is 33 cm and the thickness is about 0.38 mm.
- The protective glove has a cotton lining that is comfortable and absorbent.
- Protective glove has a textured surface that improves grip.
- Made of nitrile which is very resistant to chemicals and wear.
- Latex-free, suitable for allergy sufferers.
- Especially for processing chemicals.
- Available sizes: 7/S, 8/M, 9/L and 10/XL
EN 388: 2016, Mechanical hazards: 4101 X
Abrasion resistance (Level 0-4), Cut resistance Coupe-Test (Level 0-4), Tear resistance (Level 0-4), Puncture resistance (Level 0-4), Cut resistance TDM- ISO 13997 (A-F) and Impact resistance (If pass: "P")
EN 374-5: 2016 Protective gloves against bacteriological contamination: Bacteria and fungi
Gloves marked with a biological sign protect against bacteria and fungi. If the glove meets the requirements of the virus testing method, there is the word VIRUS next to the icon.
EN ISO 18889:2019 Protective gloves for users of plant protection products: G2
This is used to measure cumulative permeation with the pesticide. G1: Not suitable for use with concentrated pesticide formulations. G2: suitable for use with diluted as well as concentrated pesticides. GR: provide protection only to the palm-side of the hand. Suitable in contact with dry and partially dry pesticide residues that remain on the plant surface after pesticide application.
EN 374-1: 2016 Chemical contamination: Type A (AJKLMNOPT)
Type A Glove has a penetration resistance of minimum 30 minutes at minimum 6 substances.
Type B Glove has a penetration resistance of minimum 30 minutes at minimum 3 substances.
Type C Glove has a penetration resistance of minimum 10 minutes at minimum 1 substances.
Each letter represents a chemical substance. List below.
List of tested chemicals:
A Methanol
B Acetone
C Acetonitrile
D dichloromethane
E Carbon disulfide
F Toluene
G Diethylamine
H Tetrahydrofuran
I ethyl acetate
J N-heptane
K Sodium hydroxide 40%
L Sulfuric acid 96%
M Nitric acid 65%
N Acetic acid 99%
O Ammonium hydroxide 25%
P Hydrogen peroxide 30%
S Hydrofluoric acid 40%
T Formaldehyde 37%
